LINEAR-36 מייצג את הטוב ביותר בנורות עזר רזות עזר לאורות גבוהים, מגוון הליניארי משתמש בשילוב של נוריות LED 3W יעילות במיוחד ואופטיקה רחבה מתכתית בוואקום כדי לספק תבנית אלומה מכווננת בצורה מושלמת לשימוש יומיומי בכביש. טווח הליניארי, שגודלו רק 40 מ"מ, הוא פתרון מצוין כאשר המקום מוגבל או כאשר מחפשים התקנה דיסקרטית שסביר להניח שישימו לב אליה בשעות הלילה.
טווח Linear זמין במגוון גדלים החל מ-232 מ"מ (9 אינץ') ליניארי-6 ועד ל-1282 מ"מ (51 אינץ') ליניארי-48. למעט הטווח המעלה Linear-48, כל מוצרי Linear מאושרים במלואם של UNECE לתקנה 112 כאורות נהיגה Class B (לשימוש בכביש). מוצרים ברמת עילית זמינים גם בקווי מוצרים Linear-6/12/18, כאשר מוצרים אלה מתהדרים בתפוקת האור כפולה בהשוואה לגרסה המקבילה הסטנדרטית. מנורות Linear-12 Elite ו-Linear-18 Elite זמינות גם עם אפשרות לפונקציית תאורה משולבת המספקת יתרונות בטיחות ועיצוב נוספים.
למרות הפרופורציות הקטנות של מוצרי Linear, פסי תאורה LED עמוסים בתכונות מתקדמות וחדשניות כדי למקסם את הביצועים ואריכות ימים. עם המוצרים שתוכננו, הנדסו ונבנו בתוך הבית, במתקן שלנו בבריטניה, אתה יכול להיות בטוח לחלוטין בעיצוב מוצר מתקדם יוצא דופן, יחד עם רמות תאורה מעולות, הכל מגובה באחריות המקיפה שלנו ל-5 שנים.
מוצרים ליניאריים מתאימים במיוחד להתקנות גג שבהן העיצוב המלוטש והאווירי של בית האלומיניום מבטל כמעט את כל רעשי הרוח, והתפשטות האור הנמוכה יחסית למעלה/מטה מבטיחה שום בוהק ממכסה מנוע הרכב.
 
VIDEO 
מה באריזה: 
- x1 מנורת LED Linear-42
- x1 תושבת צד נגד גניבה (1127k)
 
- x1 הוראות התקנה
 
Highly efficient 3W LED technology
5000K LED colour temperature and 80CRI maximises sharpness and definition
Vacuum-metallised optics deliver wide spread of light
Reduced up/down spread of light suits even low mounting positions, or roof mounting
Sleek, low profile design eases installation
Aero design virtually eliminates wind noise on roof installations
Includes low profile side mounting brackets (anti-theft solutions included on Linear-36/42/48)
Electronic thermal management system optimises light output to preserve longevity of the LEDs
Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection
CAE optimised heatsink offers improved thermal dynamics
Over voltage protected
Reverse polarity protected
‘Unbreakable’ polycarbonate lens with hardcoat lacquer
UNECE approved Reg 112 (Class B Driving Light) for on-road high beam function
UNECE approved Reg 10
IP67 watertight
5 year warranty
Supplied with pre-wired male/female 2-pin Superseal connectors
Designed and manufactured in UK
 
Voltage Range (DC) 
10-32V 
 
LED Life 
50,000 hours 
 
Weight 
2.4 kg 
 
HIGH BEAM FUNCTION   
 
Total Luminous Flux 
15750 Lm 
 
Total Driver 'FOV' Flux † 
11214 Lm 
 
Colour Temperature 
5000K 
 
Number of High Output LEDs 
42 
 
Power Consumption 
147 Watts 
 
Current Draw (at 14.4V) 
10.2 Amps 
 
Start-up Time * 
100ms 
 
CERTIFICATION   
 
High Beam 
ECE R112 
 
ECE Reference 
50 
 
DIMENSIONS   
 
Width 
1132 mm 
 
Depth 
62 mm 
 
Height 
40 mm 
 
PHOTOMETRIC DATA   
 
Horizontal Beam Angle 
50° 
 
0.25 lx Line 
984 metres 
 
0.5 lx Line 
696 metres 
 
1 lx Line 
492 metres 
 
3 lx Line 
284 metres 
 
 
* 'Start-up time' is the delay between the lamp receiving voltage, and light being emitted. Different Lazer lamps have different start-up times, depending on their electrical architecture, so we recommend that if you are buying two different types of Lazer lamp, for mounting on to the same vehicle, that you ensure you pick products with matching start-up time (either 5ms or 100ms, depending on the product). Please check the lamps technical section on each product page to be sure you are purchasing lights with the same start-up time for the best performance.
† Driver FOV flux is a measure of effective lumens taking consideration of the amount of light in a driver's 'field-of-view' defined as an area +/- 45o left/right, and +/- 10o up/down. For more information